Setup

Three steps.
The TV you already own.

If your TV has a web browser, you're two minutes from a live pickup board. If it doesn't, a $30 stick gives it one. No computer, no installer, no new wiring.

  1. 1Open the browser On the TV, the stick, or the tablet — whatever's at the counter. No app to install
  2. 2Go to pickupsignal.com/tv A pairing screen appears with a six-letter code. Nothing typed on the TV but a web address
  3. 3Enter the code in your dashboard The screen becomes your board — and stays paired through restarts. Done. That's the install
Your device

Pick what's under your TV.

Fire TV Stick

Works on every TV with an HDMI port — this is the answer when the TV itself has no browser.

  1. Plug the stick into HDMI and connect it to the shop Wi-Fi.
  2. Open the Silk browser — it's free on the stick's Appstore.
  3. Go to pickupsignal.com/tv and enter your code.
  4. Turn the screensaver off so the board stays up: Settings → Display & Sounds → Screensaver and Turn off after → Never.

Power cut mid-shift? Open Silk again — your board is still paired.

MK4TEA
Enter this code in your Pickup Signal dashboard

What the TV shows the moment you arrive — pairing takes one code, no typing on the TV.

Samsung TV

Most Samsung smart TVs since 2017 have a built-in browser.

  1. Press Home and open the Internet app.
  2. Go to pickupsignal.com/tv and enter your code.
  3. Keep the board awake: Settings → General → System Manager → Auto Power Off → Off.

TV switched off overnight? Open Internet again — your board is still paired.

MK4TEA
Enter this code in your Pickup Signal dashboard

Same pairing screen on every device — one code, done.

LG TV

LG's webOS TVs ship with a browser out of the box.

  1. Press Home and open the Web Browser.
  2. Go to pickupsignal.com/tv and enter your code.
  3. Keep the board awake: Settings → General → Power → Screen Saver → Off.

TV switched off overnight? Open the browser again — your board is still paired.

MK4TEA
Enter this code in your Pickup Signal dashboard

Same pairing screen on every device — one code, done.

iPad at the counter

A small Ready-only screen right where drinks are handed over — great next to the register.

  1. Open Safari, go to pickupsignal.com/tv, enter your code.
  2. Choose the Ready screen role in your dashboard — it shows only orders ready to hand over.
  3. Keep it awake: Settings → Display & Brightness → Auto-Lock → Never, and leave it plugged in.

Tip: a $15 stand angles it toward customers.

MK4TEA
Enter this code in your Pickup Signal dashboard

The same code pairs a countertop screen — pick its role from the dashboard.

Android tablet

Any recent Android tablet with Chrome makes a countertop Ready screen.

  1. Open Chrome, go to pickupsignal.com/tv, enter your code.
  2. Choose the Ready screen role in your dashboard.
  3. Keep it awake: Settings → Display → Screen timeout → Never (name varies by brand), and leave it plugged in.

Tip: pin Chrome so a stray tap can't leave the board.

MK4TEA
Enter this code in your Pickup Signal dashboard

The same code pairs a countertop screen — pick its role from the dashboard.

Apple TV, Roku, or no smart TV at all? Those boxes don't have a web browser — the Fire TV Stick above is the $30 answer for any of them.